网站导航
纯电折弯机“零碳突围”：年省60%能耗，中小工厂绿色转型
在金属加工行业低碳转型压力下，陇博智能科技有限公司纯电折弯机凭借“零液压油、低能耗”特性成为工厂升级优先。以国内某年产值2亿元的中小型机箱制造厂为例，替换3台传统液压设备后，年耗电量从12万度降至4.8万度（节省60%），液压油更换成本归零（原年支出8万元），且因噪音降低（从78分贝到45分贝）改善了车间环境。技术层面，纯电机型通过伺服电机直驱替代液压泵，配合闭环控制系统，将折弯角度误差从±0.1mm缩小至±0.02mm，良品率提升8%。市场数据显示，2023年上半年国内中小型纯电折弯机销量同比增长57%，华东、华南区域电子厂、厨具制造商采购量占比超60%，政策驱动（如江苏对每台设备补贴2万元）进一步加速渗透。
Under the pressure of low-carbon transformation in the metal processing industry, Longbo Intelligent Technology Co., Ltd.'s all-electric bending machine, with its characteristics of "zero hydraulic oil and low energy consumption", has become the preferred choice for factory upgrades. Taking a domestic small and medium-sized chassis manufacturing plant with an annual output value of 200 million yuan as an example, after replacing 3 traditional hydraulic equipment, the annual electricity consumption decreased from 120,000 kilowatt-hours to 48,000 kilowatt-hours (saving 60%), the cost of hydraulic oil replacement was zeroed out (the original annual expenditure was 80,000 yuan), and the improvement in the workshop environment due to reduced noise (from 78 decibels to 45 decibels) enhanced the working environment. Technically, the all-electric model replaces the hydraulic pump with a servo motor direct drive and is combined with a closed-loop control system, reducing the bending angle error from ±0.1mm to ±0.02mm, and increasing the yield rate by 8%. Market data shows that in the first half of 2023, the sales of domestic small and medium-sized all-electric bending machines increased by 57%, with the purchase volume of electronic factories and kitchenware manufacturers in the East China and South China regions accounting for over 60%, and policy-driven factors (such as a subsidy of 20,000 yuan per device by Jiangsu) further accelerated the penetration.
公司信息
访问官网
我要咨询
每日热词
